INFINITY ID2 INSTALLATION MANUAL. Software Versions: PANEL O.X-R8629 & LOOP O.J-R8624
Approved Document No: GLT-211-7-1
Issue 1.0 Author: MG Date: 22/1/2013 PAGE 19
12.3 Labelling the Zones
1. To add a Zone label, go to engineer menu 1 and select option 2 Panel / Zone Text.
Select option 1 to enter the panel name or customer name
Select option 2 to enter the zone text (i.e. ground floor)
2. Press enter when the label has been entered. Press Next to edit the next zone.
NOTE: For many installations, only these configuration steps
are required.
12.4 Labelling the Devices
1. To add a Device label, go to engineer menu 1 and select option 3 ID DEVICE.
Press enter to bring up the cursor. Type in the device label as required
(0 = space, Cancel = delete. There are no cursors to edit the middle of a string)
2. Press enter when the label has been entered. Press Next to edit the next device, or
Press cancel to return to normal.
12.5 Setting time and date
To set the time & date, enter Configuration Menu 2 and select Configure System (6). The
System Menu is now displayed. Select option 1 to set time & date. Enter the Day, Month,
Year, Hour & Minutes as prompted, and press enter to save, or Cancel at any time to exit.
12.6 Configuring the Sounder/Flasher Base
With the ID2 system all detectors are fitted to a sounder flasher base. If for some reason
only a sounder or only a flasher is needed, the unwanted section can be turned off.
Go to engineer menu & select ID Device.
Scroll to the device to be configured (or press 1 to bring the “jump to device” prompt)
The icon in the top right corner shows the current setting.
The default is sounder & flasher on (Icon = sounder outline with a +)
Press button 7 (S for Sounder)
The icon will cycle:-
Sounder-Flasher (Icon = sounder outline with a +)
Sounder only (Icon = sounder outline)
Flasher only (Icon = +)
Base only (No Icon)
When the required option is shown, Press next to choose another device, or cancel to exit.
12.7 Changing the alarm Tones - sounders
For most applications, the alarm tone will stay at the default setting of tone 0
To change the alarm tone, select option 5 in Engineer menu 2. You then have 3 option
as shown in the window opposite
Select option 3 to change the alarm tone. There are 16 different tones that can be
selected ( 0 – 15). Once you have selected the require tone press Enter.
12.8 CHANGING FIRE RELAY RESPONSE
To change the fire relay response, select option 1 in the Alarm operation menu. From
here you will have the following options
Common Alarm
Manual Alarm
Detector Alarm
Panel / Zone Text
1: Panel
2: Zones
Optical
Normal
Fl 3 Bedroom 303
Zone:01 ID:010
Main Menu
1: Clock 4: Devices
2: Zone 5: Engineer
3: Logs
Alarm Operation
1: Fire Relay
2: Interfaces
3: Alarm Tone
Engineer Menu 2
4: Alarm Verify
5: Config Alarms
6: Misc
SndSmoke V
Normal
Bedroom 30_
Zone:01 ID:011
Engineer Menu 1
1:Configure Zones
2:Panel/Zone Text
3:ID Device
SndSmoke
Normal
Bedroom 30
Zone:01 ID:011
SndSmoke
Normal
Bedroom 30
Zone:01 ID:011
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern